Nessun prodotto
I prezzi sono IVA inclusa
2 in, 2 out
Nuovo prodotto
With a Cutting Brake you can control the rear brakes individually.
This allows you to stop/brake a spinning wheel, and in this way lead back the power, back to the wheel still in contact with the ground.
It's nothing more than a cheap alternative to a Locker. You just need to learn to operate the lever at the right moments.
0 Articolo Articoli
Questo prodotto non è più disponibile
Attenzione: Ultimi articoli in magazzino!
Disponibile dal: 08/03/2018
Dimensions of brake fittings Inlet:Ø 8,0 mm |
This brake system can do 2 things for your car (any car with an open differential *):
ad.1 When a wheel is lifting off the ground, the traction is lost; It is however possible to brake (0-100 %) the wheel that is spinning, giving you back the traction (0-100 %).
ad. 2 When turning, the steering wheel doesn't take you in the direction as quickly as you would like to go, reach for the "cutting brake". It is a great steering aid, that adds fun to your driving experience.
Watch this video showing how the rear end can be controlled. As with all 4x4 driving, some experience and practice is needed to master the "skid steering".
This "cutting brake" can control 2 wheels (usually the 2 rear wheels) with only one lever.
* It works in any car with an open differential: This includes the ATB Torsen Differential also sold by LADA World.
Please note: It may not be street legal in your country to make alterations in the brake system. It is extremely dangerous to operate the "cutting brake" at high speeds. (Tip: Dismount the lever, when driving on normal roads)
"Cutting brakes" cannot be used in the standard LADA Niva front brakes. The reason is, that each front caliper in the LADA Niva has 2 brake lines. This standard set-up makes it hard to use the "cutting brakes" without another modification.
General:Please read more about how to use the "cutting brakes" from the 2 links below. | |