Auxiliary headlight, H4
Hella 1A3 996 162-777
New product
Compact round H4-powered headlight featuring: Low beam, High beam and parking light.
Ø161 mm Chrystal Clear reflector in closed housing with M18x1,5 mounting.
Approved by: ECE (legal in all EU countries)
Rating of Insulation Class: IP55
- Write a review
Volume discounts
| Quantity | Discount | You Save |
|---|---|---|
| 2 | 10% | Up to 44,00 kr |
More info
Fits in
- LADA, all models
- Any car, truck (also 24 Volt) or tractor (see below in "Examples of application")
Contains the following parts
| LADA Spare Part number | Description | Quantity |
|---|---|---|
| 2100-162-777 | Headlight for H4 & W5W bulbs | 1 |
Other Informations
Impact-resistant reinforced black ABS housing and dense clear glass lens to withstand the toughest abuse. The housing is designed to withstand the heat dissipation from up to 75 watt light bulbs.
The ECE-approved, headlight can be mounted left-side, right-side or in upright position. (The reflector can be turned in steps of 90 degree)
NOT MADE IN CHINA !
Made in EU and ECE-approved (Having the round E-mark on the lens).
No bulbs are included !
- Bulb type for the Low- & High Beam (also known as passing & driving light) is: H4 (Not included)
- Bulb type for the parking light (also known as position light) is: W5W (Not included)
The frontal dimension is Ø161 mm. Compare that with your standard headlight dimension.
Standard LADA headlight dimension:
- LADA Niva & VAZ 2101 & 2102 = Ø178 mm
- VAZ 2103 & 2106 = Ø144 mm
Examples of application:
- Replace the standard headlights and install these where YOU want them
- Add them (if it's legal in your country !) to add more light
- Beach buggy, Offroad/Rally vehicle, Lunar/Mars rover, Tractor, Military vehicle...
Technical specifications
| Reference mark @75/70W @55/50 W: | 12,5/10 (What is reference mark ?) |
| Maximum power: | 75 Watt |
| Cable & Plug: | None. The wiring runs through the length of the mounting bolt. |
| IP rating: | IP55 |
| Work temperature: | -40°C - +80°C |
| Housing’s material: | ABS Plastic |
| Lens’ material: | Glass |
| Screw/bolt material: | Steel with a zinc plated bushing |
| Protective cover: | Sorry, does not exist |
| Mount type: | Hollow bolt with M18 nut. Socket adjustable ±10 degree up/down. |
It is possible to raise the IP rating from IP55 to IP66 by using the H4, waterproof bulb holder (Version -00)
