Crown Wheel & Pinion 4.44

2102-2402020

New product

Crown Wheel & Pinion (9:40 = 1:4,44)

This Crown Wheel and Pinion is made in Italy for Fiat (but LADA owners may also use it).

The factory is producing spare parts for Gear-boxes and Differentials in OE-quality (OE = Original Equipment).

More details

76 Items

In stock

1 400,00 kr tax incl.

Add to wishlist

PayPal & Bank Transfer
PayPal & Bank Transfer

Volume discounts

QuantityDiscountYou Save
2 200,00 kr Up to 400,00 kr
6 20% Up to 1 680,00 kr

More info

Fits in the following applications

In the Rear Differential of:
- ALL LADA Niva (VAZ 2121x)
- ALL LADA Classic (VAZ 2101 - 2107)
- FIAT 124 series up to 1997 (*)

In the Front Differential of:
- ALL LADA Niva (VAZ 2121x)

* It would fit into any old Fiat where the Differential-housing assembles from the front.

Contains the following parts

LADA Spare Part numberDescriptionQuantity
2102-2402020Crown wheel and Pinion1 set

Technical information

As shown in the table below, the gear-ratio of this Crown Wheel and Pinion will reduce the gear ratio by -12%.

The speed difference, is compared to the most commonly used gear ratio in LADA Niva: 11:43

Crown Wheel & Pinion2102-24020202101-24020202103-24020202106-2402020
Gear-ratio9:40 = 1:4,4410:43 = 1:4,3010:41 = 1:4,1011:43 = 1:3,91
Speed difference-12,0 %-9,1 %-4,7 %0,0 %

Top 3 reasons, why you would like this modification:

  1. When you drive your LADA Niva in the terrain, there are situations where you need to drive as slow as possible.
  2. Many 4x4 owners have mounted higher tires to improve the traction and lift. The increased wheel size can in some cases be too much for a weak low-torque engine like the LADA - making starting in first gear a problem.
  3. You don't want to make changes in your gear-box to achieve a lower gear-ratio. When the car-engineers adjust the overall gear-ratio, they adjust it by changing the Crown Wheel and Pinion. It's easier, rather than to change the gears in the gear-box.

Reviews

Write a review

Crown Wheel & Pinion 4.44

Crown Wheel & Pinion 4.44

Crown Wheel & Pinion (9:40 = 1:4,44)

This Crown Wheel and Pinion is made in Italy for Fiat (but LADA owners may also use it).

The factory is producing spare parts for Gear-boxes and Differentials in OE-quality (OE = Original Equipment).