Wheeldrive: CV-joint: Grease
New product
One portion (80 gram) of grease for one CV-joint.
Available in 2 design variants:
- -00 - For standard CV-joints
- -10 - For CV-joints having a Tripoid inside
Tripoid CV joint grease (-10) does not contain solid additives (particles of graphite, molybdenum disulfide, etc.) that can block the operation of the needle bearing in the tripoid CV joint.
- Write a review
More info
Designed for
- -00 is for high temperature & heavy load
- Standard CV-Joints
- Bearings in the wheel assemblies (Wheel bearings)
- -10 is for high temperature & needle bearings
- CV-joints having the tripoid inside
- Universal joints (also known as U-joints) in the propeller shaft
Contains the following parts
| LADA Spare Part number | Description | Quantity |
|---|---|---|
| ШРУС-00 | CV-joint grease in 80g bag | 1 |
| Or, | ||
| ШРУС-10 | Tripoid grease in 80g bag | 1 |
Other Informations (from the manufacturer)
Both greases are a new type of lubricants:
-00 has replaced the old MoS2 additive with metal nanopowders, resulting in an extended operating temperature range of -40°C to +140°C and improved water washout resistance.
-10 is without any solid additives and is capable of withstanding the extreme pressure that builds up inside a needle bearing.
☠ Any CV-joint grease is usually toxic. Please use appropriate protection. Better to get the stuff on the gloves, than all over your hands and rags. | ✋ Clean everything prior to the disassembling. Contamination of the CV-joint/bearing is critical. |