LADA Niva 21215-2301014 Original Teile Vergrößern

Suspension: Front differential: Independent suspension

21215-GM

Neuer Artikel

✨ Original LADA parts.

Fight the number 1 enemy in the LADA Niva: Noise and vibrations

With the front independent support, it is possible to reduce the high frequency noise coming from the engine.

Mehr Infos

Nicht mehr lieferbar

1 950,00 kr inkl. MwSt.

Auf meine Wunschliste


975 Punkte im Treueprogramm

Mehr Infos

Fits in

LADA Niva, all models.

Mounting

In order to mount this kit, you will need to do the following:

  • Remove both front axles
  • Replace the 6 studs, if the old studs are too short.
  • Weld two brackets* to the front suspension cross member
  • All the rest, is just assembling the parts back in place

The two large brackets also works as bearing cover (The old bearing cover is not needed)

* The two brackets that should be welded to the front suspension cross member is not included. It is however not rocket science, so a good garage/workshop should be able to make them without any problems.

Technical

By separating the front reducer housing from the engine (they are normally attached to each other) you reduce engine vibration (and noise) from being transmitted.
A similar kit is used in the LADA Niva Diesel (VAZ 21215).

The kit will give your front reducer housing 4 fix-points, hence a more rigid attachment to the body of the car. The old original front reducer housing only has 2 fix-points (on the engine).

The kit is made with elastic sleeves (rubber) in all 4 fix-points. The old design does not use any elastic sleeves, and is just bolted straight to the engine.

This is a required kit, if you want to build our own engine solution.
Only the LADA engines are able to attach to the front reducer housing. This is why you would need an independent (independent from the engine, that is) front reducer housing mounting (or else, the front reducer housing would fall down).

History and experience

It was originally created for the LADA Niva Diesel (VAZ 21215). The front reducer housing (Front Differential) is not able to be attached to the Diesel engine because of a different design in the engine housing, and Diesel engines are also known to vibrate with a higher amplitude compared to Gasoline. The kit solved both problems, and were re-introduced in the development of the very popular Chevy Niva.

Our experience so far is, that this kit reduces the high frequency noise (compared to the noise from the propeller axles, which is of a lower frequency).

The noise reduction is most evident in idle, and driving at a fixed speed. Travelling long distances in the LADA Niva, were not making us as tired/exhausted as before.

Bewertungen

Eigene Bewertung verfassen

Suspension: Front differential: Independent suspension

Suspension: Front differential: Independent suspension

✨ Original LADA parts.

Fight the number 1 enemy in the LADA Niva: Noise and vibrations

With the front independent support, it is possible to reduce the high frequency noise coming from the engine.

Zubehör